Course structure
Foundation year core modules
Engineering in Practice
This module supports you to use knowledge that you already possess and combine it with engineering knowledge gained through teaching and learning, experimentation, analysis and reflection. Problem-based learning and project-based learning provides core methodologies in the teaching and learning strategy. You are introduced to concepts, techniques and equipment in a guided programme of teaching that uses foundational study skills to think about new concepts, promote ideas development and introduce project management techniques. This culminates in an objective, written review of progress and development though the module and a reflective assessment of personal development.
Engineering Principles
You gain an introduction to engineering physical, thermal, fluid, electrical and mechanical systems in engineering and the scientific laws and principles that govern them. You are prepared for further studies involving these principles of engineering science.
The module is delivered in combined lecture/problem solving tutorial sessions. Laboratory practical sessions support the learning objectives. The problem solving tutorials and the practical sessions enhance the understanding of principles.
Engineering the Future
You are introduced to the importance of design, modelling and simulation in engineering context. You explore the design process and how it is applied in a holistic way. Design ideas are communicated using a number of techniques including sketching and formal engineering drawing, design calculations and written commentary. The technical aspects of engineering design such as manufacturing drawing, modelling, rapid prototyping are introduced.
Global Grand Challenges
You focus on how science can help address some of the global grand challenges that face society. A group project enables you to develop innovative answers to some of the biggest issues of our time based on health and wellbeing, resilient and secure societies, digital and creative economy, sustainable environments and learning for the 21st century. The themes reflect the University’s focus on externally facing research that makes a real, practical difference to the lives of people and the success of businesses and economies.
Materials Science
You gain foundational knowledge of important properties of engineering materials and learn engineering project-based research methods within a guided group learning context.
Flipped learning introduces you to material properties of the four basic categories of engineering materials. Tutorial sessions and group exercises highlight the factors affecting the material usage and sustainability for engineering applications. Practical sessions allow you to explore variables within material recycling methodologies.
Mathematics in Engineering
You are introduced to mathematical notation and techniques. The emphasis is on developing the skills that enable you to analyse and solve engineering problems. Topics studied include algebraic manipulation and equations, trigonometry, trigonometric functions and an introduction to descriptive statistics.
The module is delivered during combined lecture/tutorial sessions. Worked examples illustrate how each mathematical technique is applied. Problem solving tutorial exercises give you the opportunity to practice each skills or techniques.
Year 1 core modules
Engineering Mathematics
This module introduces the range of mathematical skills that are relevant to an engineering degree. You revisit and develop your knowledge of the fundamentals of algebra, trigonometry and basic statistics. The central ideas of vectors, matrices, complex numbers, and differential and integral calculus are also examined.
Throughout the module you develop a range of mathematical skills and techniques fundamental to the solution of engineering problems. You also advance your skills in selecting and applying mathematical techniques.
This module is delivered through a combination of lectures and tutorial sessions.
Heat Transfer and Fluid Mechanics
You gain a fundamental knowledge of fluid flow through pipe-work systems and the associated design tasks. You are introduced to the techniques used to predict the behaviour of fluids in Chemical Engineering applications and investigate the differences between Newtonian and Non-Newtonian fluids.
Mass and Energy Balances
The importance of stoichiometry, mass and energy balances and recycle operations is widely known and accepted in the chemical, biochemical and other related industries. You explore concepts and skills necessary to develop the skills necessary to work as a chemical engineer.
Practical Skills for Chemical Engineers
You work in a team in order to solve a process industry based problem. It gives you an understanding of your own knowledge and limitations and the importance of working with other people to solve a chemical engineering based problem. You gain a fundamental understanding of the operation of the chemical industry with respect to commercial project delivery; health and safety and ethical considerations.
Science for Chemical Engineers
This module introduces a range of key concepts in chemistry which provide a basis for understanding subsequent study in areas including analysing, synthesising and identifying compounds, and industrial production.
You learn about the nature of matter and why different substances behave the way they do. Understanding the properties of a substance is essential whether you’re designing a plant to manufacture it on a multi-tonne scale or working out how to alter its structure to improve its properties, for example as a drug or construction material. You also learn how the fundamental principles of chemical equilibrium, energetics and reaction rate are developed, and come to understand the prediction of reaction behaviour when process conditions are changed.
Thermodynamics for Chemical Engineers
You explore the concepts of chemical engineering thermodynamics.
Develop an understanding of the engineering thermodynamic properties of pure working fluids. A series of thermodynamic principles are defined, developed and then applied to solve chemical engineering related problems of increasing difficulty, in particular derivation of the first and second laws of thermodynamics are explored and then applied to real world analysis of a range of heat-power cycles.
Year 2 core modules
Applied Mathematical Methods
You develop mathematical knowledge in differential equations and numerical methods and extend your base of techniques to solve a variety of problems which arise in engineering domains. The emphasis is on developing competence in the identification of the most appropriate method to solve a given problem and its subsequent application.
Chemical Process Design
This module provides you with the opportunity to solve industrially relevant process design problems as part of a team. You develop employability skills such as project management, presentation of work, research and commercial awareness to support problem solving in a technical context.
Control and Simulation
You learn about the importance of control systems in industrial production processes, and describe fundamental concepts of linear control including feedback, Proportional-Integral-Derivative (PID) control, system dynamic response and controller tuning.
Mathematical modeling of systems based upon rate and balance equations are demonstrated, together with methods of designing feedback controllers. You use computer software to develop models of typical industrial systems and simulate their dynamic response under stated conditions.
Practical and Professional Skills
This module allows you to carry out appropriate experiments in support of mass transfer, heat transfer, reaction engineering and process control. This involves carrying out supervised experiments and producing appropriate reports in an approved format. You make some formal presentations to outline efficient laboratory reporting, error analysis techniques and preparation of risk assessments.
Process Operations
In most production units, chemical engineers separate the desired product from the other compounds and concentrate it to give the desired product specification.
You gain a sound understanding of mass transfer theory. You learn about mass and energy conservation and particle technology and the basic concepts behind the design and operation of mass-transfer equipment.
Reactors and Bioreactors
The core of most chemical processes is a chemical reactor to produce the desired product. Sometimes the components of the reaction may be biologically active.
You gain a sound understanding of the fundamental concepts of reaction engineering in chemical and biochemical systems. You make use of the essential knowledge of mass and energy conservation, reaction equilibria and kinetics and are introduced to the basic concepts behind the design of different types of chemical and biochemical reactors.
Optional work placement year
Work placement
You have the option to spend one year in industry learning and developing your skills. We encourage and support you with applying for a placement, job hunting and networking.
You gain experience favoured by graduate recruiters and develop your technical skillset. You also obtain the transferable skills required in any professional environment, including communication, negotiation, teamwork, leadership, organisation, confidence, self-reliance, problem-solving, being able to work under pressure, and commercial awareness.
Many employers view a placement as a year-long interview, therefore placements are increasingly becoming an essential part of an organisation's pre-selection strategy in their graduate recruitment process. Benefits include:
· improved job prospects
· enhanced employment skills and improved career progression opportunities
· a higher starting salary than your full-time counterparts
· a better degree classification
· a richer CV
· a year's salary before completing your degree
· experience of workplace culture
· the opportunity to design and base your final-year project within a working environment.
If you are unable to secure a work placement with an employer, then you simply continue on a course without the work placement.
Final-year core modules
Advanced Process Operations
You broaden your knowledge and deepen your understanding of process unit operations and the underpinning science. It provides you with design methodologies for complex unit operations involving multicomponent distillation, liquid-liquid extraction, gas absorption, membrane processes and chromatography. You gain an in-depth understanding of the application of thermodynamics to mixtures.
Chemical Engineering in Industry
Develop[ your appreciation and understanding of process safety, and learn to broaden your understanding of the current industrial landscape of chemical engineering.
Chemical Engineering Project
Consider the design work introduced throughout the course in to a single cohesive design exercise. Explore the requirements set down for process design degrees by the Institution of Chemical Engineers (IChemE).
The project follows standard industrial design methodologies from initial design brief through to complete design of a chemical process.
Environment and Sustainable Processing
A group work project-approach addresses the impact of industrial and human activities on the environment and the need for a sustainable approach to future developments. You specifically consider sustainable remediation strategies for air, water and land pollution and alternative fuel and energy technologies towards zero carbon emission.
This module addresses key concepts and skills essential for an exploration of environment and sustainability. It also instils a broad and deep understanding of environmental problems. You are assessed by a group poster presentation (40%) and an academic paper (60%). Individual marks for this piece of group work are moderated according to evidence of your engagement with the process, including self and peer assessment.
Reactors and Catalysis
You develop your understanding of reaction engineering and apply your knowledge to complex and multi-phase reactions/reactors systems. You are also introduced to catalyst preparation and characterisation, and the use of catalysis in reaction engineering.
